|
CWTOUCHKEYER |
||||||
P3 SMD
SMD DUAL TOUCH PADDLE CIRCUIT CARD (Kit Form)
ONLY .9 W x .7" D
|
Use any metal object for your paddlle. Board Size 0.9" x 0.7"
|
HIGHLY RESPONSIVE WITH THE SLIGHTEST TOUCH * SELF CALIBRATING ON POWER-UP * NOT AFFECTED BY MOISTURE, DRYNESS or DIRT * < 2mA POWER CONSUMPTION * IDEAL FOR CUSTOM PADDLE DESIGNS. ORDER YOURS TODAY!!!
PRICING INCLUDES SHIPPING. US ONLY |
Use your imagination to create your perfect paddle.
Create your own set of touch paddles using just about any conductive metal
and wire them to the model P3 circuit card. (up to 24" away)
Model P3SMD circuit card is so small (0.9" W x .0.7" D x .3" H) it can fit inside most homebrew equipment.
Operates on 6-14 DC volts. Positive Keying of 13.8 Volts or Less.
Paddle separation: > .45" (To prevent capacitive paddle interaction, paddles should be separated by a minimum of .45".
However, this specification will vary with paddle size.)
Output:
Non-touched paddle Infinity Ohms
Touched paddle <10 ohms
Output Response Directly proportional to the paddle touch time.
Just bring two, non shielded, wires out from the rig
or any electronic keyer to any two pieces of metal and your touch paddles are ready to use
(rig must have an internal keyer of course).
Paddles must not touch any other metal object!
Can be used as a STRAIGHT KEY also. Simply use just one paddle,
connect it to your "key-in" point
and tap away on your code.
This product is ideal for you to use your creativity and talent in developing
your own unique paddles.
Like to work with wood? Create your new paddle with any wood design.
Assembly Instructions
