CW Touch Paddles – Model P1

DUAL TOUCH PADDLE CIRCUIT CARD

 plus ELECTRONIC KEYER, with MEMORY

 Runs Off 9V Internal Battery or 6-12VDC Wall-Wart

P1 Back10

Ultra Lite Touch – No pressure required

No Clicking Sounds – because there is

Zero Paddle Movement and

NO Mechanical Contacts

Less than 3 mA of standby current.

That means a 9v battery will last over 300 hours if you do not forget to turn it off.

Shut it down when not in use and the battery will last over 6 months based on normal usage.

Paddles do not rely on skin resistance. Paddles are not serpentined and are solid, gold-plated.

The P1 Paddle/Keyer is ideal for the high speed CW enthusiast offering up to 50 WPM.

   The model P1 rivals the discontinued high speed WBL paddles

and any currently manufactured paddles costing hundreds of dollars.  

Just think “SUPERIOR RESPONSE, with NO FALSING”.

 Want a key that accurately responds to your lite touch without errors,

movement or clicking sounds?  

This is it!!!!

 NO CLICKING SOUNDS         Ultra SOFT TOUCH with QUICK POSITIVE RESPONSE
   5 to 50 WPM   AUTOMATIC PADDLE CALIBRATING
   IAMBIC A OR B or ULTRAMATIC keying modes   MEMORIES & SETTINGS ARE NON VOLATILE
   OPERATING SIDETONE FROM 390 TO 1750HZ   PADDLES REVERSIBLE FOR DOTS AND DASHES
   GOLD PLATED PADDLES      PADDLE SPEED CONTROLLED BY POT OR PADDLES
   LOW POWER CONSUMPTION (<2 mA standby)   SPEED READOUT via MORSE CODE
   TWO 80 CHARACTER MEMORIES PLUS AN 80

   CHARACTER CALLSIGN MEMORY.

   RIVALS THE QUIETNESS, QUICK and SUPER SMOOTH

   RESPONSE OF any EXPENSIVE PADDLE. NO FALSING

   OR  optionally two 80 and two 40 character memories   AJUSTABLE ELEMENT WEIGHTING
   9 VOLT BATTERY OPERATION OR WALL WART

KEY FEATURES INCLUDE:

* Gold-Plated Solid Metal Paddles (as thick as your house key)

* Small 4.5″W x 3″ D x 2″ H. Black ABS Plastic Case

* Weight 15 oz. to Reduce Travel

* Powered by Internal 9V Battery or External 6 – 12 vdc Wall Wart

* Side Tone From Small Internal Piezo Speaker

* Power Consumption of <2 mA standby

* Positive Keying of 13.8 Volts or Less (TTL compatible)

* Programmable Call Sign Memory (40 Char.)

* Programmable Optional Memory (40 Char.)

* Three Outputs:

1.  Electronic Keyer

2.  Paddles Only. For use with any other electronic keyer

 3.  External Speaker

Completely Self-contained

(Less AC Power Source & External Speaker)**

  ** No external wall mount power source is supplied with this model.

      Please order model PS9V power supply separately.

The ULTRA LITE TOUCH PADDLE Keyer is simple and comfortable to use.

Unlike standard keys or paddles, there are no moving parts and no metal-to-metal contacts

that create annoying clicking sounds and need to be clean periodically.

   

An ultra lite touch to the paddles creates perfectly spaced dots and dashes

with adjustable speeds from 5 to 50 WPM.

  

Unlike other touch paddles on the market, there are no serpentine paddles, or gizmos that make it work.

Paddles are solid metal gold-plated metal.

With an ultra soft touch, the ULTRA LITE TOUCH PADDLES exhibit a quick, smooth and positive code response.    

The P1 TOUCH PADDLE KEYER is a complete paddle & electronic keyer utilizing a

custom programmed PIC keyer chip.

Model P1 also comes standard with a paddle output jack, which bypasses the keyer chip,

for those wishing to use an external electronic keyer having different features,

yet still maintaining the comfort and performance of the touch paddles.   

You have never experienced anything like it!

The P1 internal speaker is not intended for normal listening. We strongly recommend an external speaker.

The internal speaker is primarily for use in field applications where a larger external speaker is not available.

The audio level from the internal speaker is low. It�s primary purpose is to provide audio feedback

The audio level from the internal speaker is low. It�s primary purpose is to provide audio feedback

when programming the unit without an external speaker.

P1 Back Panel

Supplied with all plugs

NOTE: The keyer output transistor circuit is designed to switch key input

of 13.8 Volts positive or less.

Do not attempt to use any CW Touch Keyer products with a vacuum tube transmitter

(either grid blocked or cathode keyed) without an appropriate output circuit.