DUAL TOUCH PADDLE CIRCUIT CARD
plus ELECTRONIC KEYER, with MEMORY
Gold Plated Paddles Mounted on PC Card
No Moving Parts or Contacts to Wear Out
PC CARD IS ONLY 2″ W x 1.25″ D x .6″ H
WITH THE SLIGHTEST TOUCH
* SELF CALIBRATING ON POWER-UP
* NOT AFFECTED BY MOISTURE, DRYNESS or DIRT
* < 2 mA POWER CONSUMPTION
* IDEAL FOR CUSTOM PADDLE DESIGNS.
Ultra Lite Touch – No pressure required
No Clicking Sounds – because there is
Zero Paddle Movement and NO Contacts
Model P2 circuit card is so small (2″ W x 1″ D x .6″ H) it can fit inside most homebrew equipment.
Operates on 6-14 DC volts. Positive Keying of 13.8 Volts or Less.
Less than 3 mA of standby current.
That means a 9v battery will last over 300 hours if you do not forget to turn it off.
Shut it down when not in use and the battery will last over 6 months based on normal usage.
Paddles do not rely on skin resistance. Paddles are not serpentined and are solid, gold-plated.
The P1 Paddle/Keyer is ideal for the high speed CW enthusiast offering up to 50 WPM.
The model P1 rivals the discontinued high speed WBL paddles
and any currently manufactured paddles costing hundreds of dollars.
Just think “SUPERIOR RESPONSE, with NO FALSING”.
addles must not touch any other metal object!
|NO CLICKING SOUNDS||Ultra SOFT TOUCH with QUICK POSITIVE RESPONSE|
|5 to 50 WPM||AUTOMATIC PADDLE CALIBRATING|
|ULTRAMATIC OR IAMBIC A OR B keying modes||MEMORIES & SETTINGS ARE NON VOLATILE|
|OPERATING SIDETONE FROM 390 TO 1750HZ||PADDLES REVERSIBLE FOR DOTS AND DASHES|
|CALLSIGN REPEAT||PADDLE SPEED CONTROLLED BY POT OR PADDLES|
|LOW POWER CONSUMPTION (<2 mA standby)||SPEED READOUT via MORSE CODE|
| TWO 80 CHARACTER MEMORIES PLUS AN 80|
CHARACTER CALLSIGN MEMORY.
| RIVALS THE QUIETNESS, QUICK and SUPER SMOOTH|
RESPONSE OF any EXPENSIVE PADDLE. NO FALSING
|OR optionally two 80 and two 40 character memories||AJUSTABLE ELEMENT WEIGHTING|
|9 VOLT BATTERY OPERATION OR WALL WART|