CW Touch Paddles – Model P4

DUAL TOUCH PADDLE CIRCUIT CARD

plus ELECTRONIC KEYER, with MEMORY

 ON A 2.1″ X 1.2″ PC CARD

P4

Ultra Lite Touch – No pressure required     

No Clicking Sounds – because there is

Zero Paddle Movement and NO Contacts

Less than 2mA of standby current

Use any conductive metal object as you paddles.  Be creative!!!

 Want a key that accurately responds to your lite touch

without errors, movement or clicking sounds?  

This is it!!!!

  NO CLICKING SOUNDS         Ultra SOFT TOUCH with QUICK POSITIVE RESPONSE
   5 to 50 WPM   AUTOMATIC PADDLE CALIBRATING
   ULTRAMATIC OR IAMBIC A OR B keying modes   MEMORIES & SETTINGS ARE NON VOLATILE
   OPERATING SIDETONE FROM 390 TO 1750HZ   PADDLES REVERSIBLE FOR DOTS AND DASHES
   CALLSIGN REPEAT   PADDLE SPEED CONTROLLED BY POT OR PADDLES
   LOW POWER CONSUMPTION (<2 mA standby)   SPEED READOUT via MORSE CODE
   TWO 80 CHARACTER MEMORIES PLUS AN 80

   CHARACTER CALLSIGN MEMORY.

   RIVALS THE QUIETNESS, QUICK and SUPER SMOOTH

   RESPONSE OF any EXPENSIVE PADDLE. NO FALSING

   OR  optionally two 80 and two 40 character memories   AJUSTABLE ELEMENT WEIGHTING
   9 VOLT BATTERY OPERATION OR WALL WART  

Kf7ad

ere’s an nice example of packaging a P4, from my friend KF7JAD.

Only problem he is now locked out of his house.

 

The ULTRA LITE TOUCH PADDLE Keyer is simple and comfortable to use.

Unlike standard keys or paddles,

there are no moving parts and no metal-to-metal contacts

that create annoying clicking sounds, and no contact cleaning.

An ultra lite touch to the paddles creates

perfectly spaced dots and dashes

with adjustable speeds from 5 to 50 WPM.

NOTE: The keyer output transistor circuit is designed to switch key input of 13.8 Volts positive or less. Do not attempt to use any CW Touch Keyer products with a vacuum tube transmitter (either grid blocked or cathode keyed) without an appropriate output circuit.